Dwarfed by the huge dragline bucket at the Independent Mining Services Qld workshop at Paget are (from left) IMS director Gary Brown, IMS business development manager Ryan McGovern, IMS operations manager Michael Hilton, SIMCO director Marty Simpson, SIMCO support manager Barry Manning and SIMCO mechanical engineer Sam Hasnat. Photo Alan Quinney / Daily Mercury
Dwarfed by the huge dragline bucket at the Independent Mining Services Qld workshop at Paget are (from left) IMS director Gary Brown, IMS business development manager Ryan McGovern, IMS operations manager Michael Hilton, SIMCO director Marty Simpson, SIMCO support manager Barry Manning and SIMCO mechanical engineer Sam Hasnat. Photo Alan Quinney / Daily Mercury Alan Quinney

Bucket weighing 90 tonnes finds its home at Curragh Mine

ONE of the largest dragline buckets made has been built in a Mackay workshop.

The huge scoop that removes overburden from coal seams will this week begin its work at Westfarmers's Curragh Mine near Blackwater after being transported by road at the weekend.

The project, and others, is the result of a co-operative effort by two Mackay-based firms, SIMCO and Independent Mining Services Queensland.

The bucket was engineered and designed by SIMCO, which commissioned IMS Qld to fabricate the project.

SIMCO director Marty Simpson said the bucket was a repeat order from Westfarmers after IMS Qld build a smaller one for the mine in 2013.

The giant dragline bucket loaded onto the truck prior to being taken from the workshop to Blackwater.
The giant dragline bucket loaded onto the truck prior to being taken from the workshop to Blackwater. Alan Quinney

"We selected IMS because they have a state-of-the-art facility," Mr Simpson said.

"IMS is one of only a few firms in the region that can lift a bucket of this size in its workshop."

IMS Qld director Gary Brown said the bucket weighed about 90tonnes and took eight weeks to build.

He said eight to 10 people a shift worked around the clock to complete the project.

The steel in the bucket was cut in Mackay, adding to the mostly local content of the project.

"It will move a payload of 240tonnes of dirt per swing when in operation," Mr Brown said.

It was the largest project to built from the ground up at the workshop, he said.

The bucket was the second to be built in the IMS Qld workshop in three months, with another smaller version sent to Newlands Mine near Glenden.

The huge dragline bucket at the Independent Mining Services Qld workshop at Paget.
The huge dragline bucket at the Independent Mining Services Qld workshop at Paget. Alan Quinney

The latest project left the IMS Qld premises on Saturday for the eight-hour trek over the Eton Range and along the Peak Down Highway to Emerald.

It was to arrive at Curragh Mine yesterday.

Due to its size the load was to be under police escort, normal escort and accompanied by Ergon Energy personnel who were to lift power lines if necessary along the way.

Mr Simpson said after its arrival at the mine it would take about a day to change over and fit the bucket to the dragline.

"This is a good news story for Mackay in the current economic climate," he said.

"And SIMCO has orders for further buckets in place."



SUPER SYSTEM: Massive solar install powers mill

premium_icon SUPER SYSTEM: Massive solar install powers mill

Switching on the solar at South Grafton sawmill

From president to a crazy old lady, Fran's played all roles

From president to a crazy old lady, Fran's played all roles

Fran McHugh steps down after 10 years in charge of Criterion

MIND GAMES: Tigers restructured, ready to launch into season

MIND GAMES: Tigers restructured, ready to launch into season

NEW competition structure throws spanner in the works for Tigers.

Local Partners